Travel Power Compatibility Checker

Enter your device specs and the destination voltage to see whether a simple plug adapter will do or if you need a heavy-duty converter and frequency caution.

Rated power draw shown on the device or power brick.
Lowest input voltage printed on the rating plate.
Highest input voltage the device accepts.
Nominal mains voltage at your destination.
Optional. Defaults to 25 % extra capacity.
Optional. Defaults to 0 (adapter required).
Optional. Defaults to 50 Hz for many countries.
Optional. Defaults to 50 Hz if label is blank.
Optional. Defaults to 60 Hz for dual-frequency electronics.

Examples

  • Spanish hair dryer 1,400 W rated 220–240 V heading to Japan at 100 V, plug mismatch, 30 % margin ⇒ Power prep: add plug adapter; converter capacity 1,820.00 W; frequency compatible (50 Hz)
  • Laptop 65 W rated 100–240 V with matching plug in Canada (120 V, 60 Hz) ⇒ Power prep: plug matches destination; converter not required (0.00 W); frequency compatible (60 Hz)

FAQ

How do I know if my device is dual voltage?

Check the rating label—if it lists a voltage range like 100–240 V, it will operate on both low and high mains supplies.

What size converter should I buy for motorised devices?

Use a margin of at least 50 % above the wattage because startup surges can briefly double the draw.

Does frequency really matter for travel gadgets?

Most switch-mode supplies handle 50/60 Hz, but single-speed motors and clocks may run slow or overheat when frequency is off.

Additional Information

  • Converter capacity multiplies the device wattage by the safety margin so resistive loads have breathing room.
  • Frequency compatibility compares destination Hertz with the min/max range on your charger or appliance.
  • Plug adapter guidance assumes Type A/B sockets by default—toggle the flag when your plug already matches.

Related calculators